Alton, NH

A Three-Phase Transformation Designed Around the Lake

This lake house project began with three primary objectives: design and fabricate a custom cedar pergola along the lake-facing side of the home, transform an underused screen room into a four-season living space while preserving the lake views, and reconfigure an existing single bathroom into two separate bathrooms.

What began as an extensive design project ultimately became a multi-phase renovation. We looked at each area individually while developing a comprehensive design package that allowed the homeowners to visualize the finished project and establish a clear plan for completing the work in phases.

Phase One — Custom Cedar Pergola & Exterior Restoration

The homeowners felt the large, water-facing side of the house needed something to break up the long exterior and add architectural interest. They began considering a pergola or similar structure that could also create a more defined outdoor living area.

The design presented several challenges, including a 25-foot motorized awning that needed to be incorporated into the design and new structural footings required to support portions of the pergola.

Once the homeowners saw the first design, they knew it was what they wanted. We began sourcing the materials and developing the construction details for the approximately 40-foot-long custom cedar pergola.

During installation of the pergola ledger, we uncovered significant rot behind the existing siding. Further investigation revealed that an improperly flashed second-floor window had allowed water to enter the wall assembly over time.

At that point, our focus shifted to correcting the underlying problem. What initially appeared to be a localized repair developed into a more extensive exterior restoration. We stripped the siding from that side of the house, repaired the deteriorated framing and sheathing, properly flashed the windows, and installed new siding to ensure the issue was addressed correctly rather than simply covered up.

Once the repairs were complete, we returned to the pergola. The homeowners chose to stain all of the cedar themselves before installation, and we worked closely with them throughout the fabrication and installation process.

One section of the pergola was designed with clear polycarbonate roofing, allowing the homeowners to enjoy the deck even during rainy weather while maintaining the open feel of the structure.

Adding the roof section also introduced additional structural considerations because of the resulting snow loads and concentrated point loads. We incorporated the appropriate structural support and footings to accommodate those loads.

The completed pergola creates a strong architectural element along the lake-facing side of the home while providing a more defined and usable outdoor living area.

Phase Two — Transforming the Screen Room into a Four-Season Room

The second phase focused on an existing screen room that wasn’t getting the amount of use the homeowners had hoped for.

They asked if the existing space could be transformed into a comfortable four-season room—and we developed a design to do just that.

We studied the architecture and aesthetics of the existing home and designed the new space to feel cohesive with the original house rather than looking like an addition simply attached to it.

Maintaining the property’s connection to the lake was a major priority. We maximized the amount of glass along the water-facing sides of the room, incorporating Marvin Ultimate transom windows paired with Marvin Ultimate glider windows to create expansive views while maintaining the architectural character of the home.

The existing space received new electrical and lighting, along with a spray-foamed building envelope to improve insulation and make the room comfortable for year-round use.

A new Douglas fir ceiling adds warmth and character to the interior, while new cedar siding ties the exterior into the existing home and surrounding natural setting.

The finished room provides the homeowners with a comfortable four-season space that takes full advantage of the lake views while feeling like a natural extension of the original home.

Phase Three — Creating Two Bathrooms from One

The final phase focused on the existing second-floor bathroom.

The homeowners wanted to improve the functionality of the space by converting the single bathroom into two separate spaces: a dedicated ensuite for the adjoining bedroom and a separate guest bathroom.

We completely gutted the existing bathroom and reworked the framing and floor plan to accommodate the two new spaces within the existing footprint.

New plumbing and electrical systems were installed throughout both bathrooms. Heated floors were incorporated beneath the new ceramic tile, adding comfort to the newly renovated spaces.

The bathrooms were finished with Swanstone shower walls, ceramic tile, custom-built vanities fabricated in-house, and new glass shower surrounds.

The result was a significant improvement in both functionality and privacy without requiring an addition to the home.

The Result

What began as three individual ideas became a comprehensive, multi-phase transformation of the lake-facing side of the property.

The custom cedar pergola added architectural interest and created a more defined outdoor living space. The former screen room became a bright, comfortable four-season room designed around the lake views. And the bathroom renovation significantly improved the functionality of the second floor by creating two bathrooms from one.

Throughout the project, our design-build approach allowed us to respond to existing conditions as they were uncovered while maintaining the overall vision for the property.

The result is a home that is more functional, more comfortable, and better connected to its lakefront setting, with each phase designed to complement the architecture and character of the original home.